Advertising on the portal

Options for finishing the arch in the doorway

Doorways with arches have long gained their popularity among the population. New building materials and elements have made the creation of this decorative element much easier. One drywall is worth something - it has facilitated the process many times over. However, after creation, it will need to be finished. Just about how to finish the arch in an apartment or house, let's talk in this article. In practice, there are a large number of finishing methods, but within the framework of the article, we will consider the main, most popular ones and touch on the features of finishing with them.

Buying material for finishing the arch in the apartment will not be a problem. The difficulty will be the choice. Among the wide range of immediately you can get confused. This is only in appearance. And if you take into account their characteristics, then in general you can get into a stupor.

Wallpaper

They are the most popular finish. Let's take a look at the benefits:

  • The most accessible material;
  • The finishing process is simple;
  • Allow you to create any style or design;
  • Ability to choose the desired texture and color;
  • You can choose moisture resistant or for coloring. Significantly expand the possibilities of decor, but will cost more.

However, it is impossible to do without disadvantages:

  • Low service life. Will lose their saturation and color. Plywood is periodically required;
  • Doesn't take damage well. In case of tears, gluing will be impractical, the attractiveness immediately decreases.
  • It does not have moisture resistant qualities, with the exception of more expensive washable options.

Finishing sequence

Making an arch in an apartment with your own hands is not difficult. However, for those who have not previously engaged in gluing, the following sequence of actions will come in handy:

1. Dilute the glue according to the instructions. When preparing, the main thing is to prevent the appearance of lumps, they can disrupt the whole process. Mix the glue thoroughly.

2. First, a strip is glued on the wall near the arched opening. The next piece of wallpaper is glued in such a way that it covers a small part of the opening. After gluing, the protruding part must be cut off. However, an allowance of about 2.5 cm should be left.

3. The left allowance is incised every 2 cm and folded to the slope. Sticks to the surface with maximum density.

4. Glue the room wall on the other side in the same way.The final operation will be pasting the vault of the arch. You will need to cut off a strip of wallpaper with a width corresponding to the depth of the opening. Here, keep in mind that make the length longer so that, if necessary, it is possible to move the strip to match the patterns.

5. The strip should be firmly glued to the arch and side walls. If the arch is high, it is allowed to divide the strip into several parts.

6. Finally, wipe everything with a dry cloth, removing air bubbles.

As you can see, it is quite possible to finish the arch in the apartment with wallpaper on your own. If there is any doubt, we will provide a video instruction below.

Decorative plaster

The decor of the arch with decorative plaster is also quite popular. Allows you to create a variety of textures or patterns, thereby giving maximum uniqueness in the doorway. The benefits are:

  • Ease of installation. A novice master will also cope;
  • Low cost;
  • Wide opportunities for creativity.

Plastering also has its drawbacks:

  • The difficulty of repairing the damaged area. However, it is easier than in the case of wallpaper;
  • The complexity of care. He does not like moisture, and the relief on the surface complicates wiping.

Finishing sequence

A worthy option when deciding how to finish the arch in the room. The application sequence will be as follows.

1. First of all, it is necessary to carry out work on leveling the surface of the opening for the subsequent application of decor.

2. Careful alignment is not required. It is only necessary to eliminate serious irregularities. It is enough to putty the surface.

3. After applying the putty, a primer treatment follows. Necessary for better adhesion of the surface and finish.

4. When the primer is dry, you can start applying the plaster. It is applied with a spatula. The plaster applied to the surface is processed with a grater or sponge to create the necessary surface structure.

5. Upon the final solidification of the material, the surface is painted.

Thus, an arch in an apartment with your own hands from decorative plaster is not a complicated process. It is quite possible for everyone.

Decorative rock

The arch trimmed with decorative stone undoubtedly looks chic. The material is able to easily fit into any decor. Advantages:

  • Ease of maintenance. It is difficult to damage and is not afraid of moisture;
  • High service life. Does not lose its original appearance;
  • Presentable appearance. Able to add luxury to any interior.

However, processing the arch with artificial stone is not too cheap. This is the main drawback - the cost, which affects its demand. In addition, if you have not laid such material before, it is unlikely that you will be able to finish it qualitatively.

Mounting sequence

Let us note that this finishing method does not require maximum leveling of the wall surface which greatly simplifies the whole process. You can finish the arch in the doorway in the following sequence.

1. A solution is being prepared. Depending on the type of stone, a different solution can be used, it needs to be clarified. The most versatile option is to use liquid nails.

2. Start from the bottom. The first element is laid at the junction of the wall and the opening. It is adjusted using the building level and pressed.

3. The entire arched opening is lined.

4. Stone elements laid along the arc are cut along its radius. Use USM. Cut the cut with a file.

5. The space of the seams is sealed with mortar. On sale there are special formulations for this material.

Mosaic

The next fairly popular material will be mosaic. The range is also very large. All modern technologies are used in production. For those who are looking for how to finish a drywall arch, it will be one of the best options, as they are made of the following materials:

  • Ceramic;
  • Glass;
  • metal;
  • Tiled;
  • Concrete.

Finishing is carried out by analogy with a decorative stone. Also, the elements are mounted using an adhesive solution.

A feature of laying may be the need to select a pattern. Therefore, if you plan to do the work yourself, then consider this complication.

Corners and moldings

Many home craftsmen are thinking about how to decorate the arch in the best way. To do this, in addition to wallpaper or decorative plaster, various kinds of moldings and corners are sold. The range is extensive. The materials from which they are made are also metal, gypsum, polyurethane.

The mounting process is simple. At the ends of the arch, they are installed on both sides. Fixed with liquid nails. The installation process is the same for both elements. Made from the following materials:

  • Plastic;
  • Aluminum;
  • Wood;
  • Metal;
  • Polyurethane.

In general, everyone can finish the arch. The first step is to decide on the material, and then study the installation technology, which for the most part is not complicated.