Modern boiler room in a private house: 4 types of strapping

An important condition for comfort in a private house is heating. A home boiler room is the best option for this. There are several main types of generators that are suitable for autonomous heating of houses or cottages. Therefore, you need to think about the construction of a boiler room in advance, while the finishing work at home is still going on.

Boiler room in the house: the main types for private ownership

The boiler room does not have any specific design. In a private house, you can install any boiler room that the owner himself wishes. There are no single parameters. The owner himself chooses the size, location and equipment for the boiler room.

Heating equipment requires strict control. It often needs to be installed separately from the main building, as such equipment is dangerous. Therefore, you need to follow certain requirements in order to protect yourself and your loved ones.

Boiler room, it is also called a furnace or boiler room, can be located both outside the house and in it. It can be placed in very different places: on the basement floor, in the garage, outbuilding or basement. However, it is best to place it at some distance from a country building.

Type of boiler room according to its location:

• Built-in boiler room in the house, which does not have a separate room. All equipment (boiler, pump, boiler) can be located in the kitchen or in the hallway. This option is the cheapest, suitable only for a small boiler.
• Boiler room, built into the house, but located in a separate small room
• Boiler room, which is located in the annex. This option is suitable for equipment that generates a lot of noise.
• Separate mini-boiler room, located at a distance from the building.

The cheapest option is the boiler room in the kitchen, suitable only for a small boiler. A convenient option for a boiler room for heating is inside the house, but it is located in the room intended for it. The boiler room attached to the room may have a separate door. The safest is the boiler room, which can be built separately from the main dwelling, but this is very difficult and expensive to do.

Boiler project for a private house: selection criteria

An important stage in the construction of a boiler house designed for a private house is design. You cannot create a project on your own, it must be done by a specially trained designer. He, in turn, must have all the necessary documents.

On the working drawings, all calculations are performed, as well as the selection of the necessary equipment for construction. And all actions and decisions are described in a special note. All these documents will be required for submission to the relevant authorities.

The approval process also depends on the complexity of the project, which can take several months. If there are no claims, and there is a seal on the documents, then you can start building. When a project is being made, then it is already necessary to choose the type of boiler room, paying attention to some criteria.

Criteria to pay attention to:

• Heating mode;
• Type of energy carrier;
• Place of installation;
• ventilation;
• Lighting;
• Size: the height should be approximately 2.5 m, and the volume of the entire room should be 15 m3.

Examples of boiler rooms can be different: gas, solid fuel or electric. The gas boiler house is the most unsafe, the norms and requirements for it are very strict, because the gas is explosive. Solid fuel type devices are less explosive, but they are also installed outside the home. Some boilers can even work on wood. Such a boiler room is called a stoker. Properly laid electrician is the key to safety. Be sure to make grounding.

Necessary boiler equipment for a private house

The most important thing for a boiler room is not only the room, but also its equipment. If you correctly select the equipment, you can get excellent functionality and quality of heating.

The boiler room is a place where it should be not only convenient and neat, but also safe. Be sure to install all devices, observing all safety rules. It needs to be finished only with high-strength materials.

One boiler, of course, will not cope with the main task, namely, it will not be able to heat the whole house. To help him, you need to purchase additional equipment that is installed by specialists. You can equip a boiler room with your own hands, but this process requires special skills and knowledge. Therefore, it is better to entrust the arrangement of the boiler room to the masters of this business.

Boiler room equipment:

• Heating boiler;
• Expansion tank;
• heat accumulator;
• Boiler;
• Distribution manifold;
• Pump;
• Shut-off valves;
• Pipes;
• Automation;
• Chimney.

Having purchased all the elements, you can attach them yourself or hire a specialized craftsman. Boilers can be attached to the wall at a distance of 10 cm or simply placed on the floor. If the boiler is installed on the floor, then a foundation is required. The ceiling, floor and walls are best finished with heat-resistant materials. All parts are installed manually.

Finishing a boiler room in a private house: photos and materials

Finishing the boiler room is a very important stage of construction. You need to equip and finish the room very competently - this is the key to your safety. To do everything right and at the same time beautifully, you need to fulfill all the requirements and adhere to the norms.

Before proceeding with the decoration of the room, first, you need to determine what material you will use for these purposes? There are a large number of materials for this, but the most alternative option is tile.

After reviewing various photographs of individual options for finishing boiler rooms, you need to make a choice or create your own room design and bring it to life.

Non-combustible finishing materials:

• Ceramic tile. For wall decoration - this is the ideal solution.
• Porcelain stoneware. They are usually covered with the floor of the boiler room, as it is able to withstand heavy loads.
• Xylolithic Fiber Sheet. It is an environmentally friendly material, able to withstand very high temperatures (1000 degrees).
• Refractory and heat-resistant plaster. It is able to withstand an open flame for several minutes. It can also be painted in different colors without losing its flame retardant properties.

Finishing inside the boiler room can be made of inexpensive materials, but they must meet all the requirements. The price of some of them can even be very modest. The main thing for the boiler room is not its decoration, but the equipment. That's what you need to spend savings on, in order to feel safe later.

Installation of a boiler room in a private house: some requirements

A boiler room is needed to heat a country house. The arrangement of such a room requires an absolutely competent approach. It is this device that creates coziness and comfort of your home, as well as its safety. Therefore, it should be approached with special attention.

You can not save on some materials, and especially equipment. It is better to entrust the installation of the boiler and some additional equipment to professionals. They will do their job competently and efficiently, with all acceptable standards.

The most important for this process is the interior decoration of the room. It must be so fireproof that it can withstand an open flame for about 25 minutes. There are also some specific nuances that must be foreseen in advance, regardless of where your boiler room will be located.

Boiler requirements:

• Calculate the power of the boiler, taking into account the area of ​​\u200b\u200bthe room;
• Equipment is best purchased in advance;
• Choose the door of the required size, be sure to fireproof;
• All dimensions of the boiler room must comply with special standards;
• Give preference to finishing material - tiles.

Before starting the construction of the hotel room of the boiler room, a plan is made, which must be coordinated with the gas service. Then, of course, this object must be added to the technological plan of the entire site.

Boiler room equipment in a private house (video)

Modern projects of private country houses imply the presence of such a room as a boiler room, where all the equipment for heating the entire area of ​​\u200b\u200bthe house will be located. Such a boiler room can operate on a different energy source. This is usually natural gas, which comes from the main transmission network. If, nevertheless, there is no gas, then boilers operating on solid or diesel fuel, electricity can be used. However, the most popular and not expensive fuel, nevertheless, is gas.