Ceiling lighting around the perimeter - original and harmonious

Increasingly popular today is this type of room lighting, like spot lighting of the ceiling. With its help, you can not only hide various flaws in the ceiling surface, but also decorate the room to a large extent, since the design of illuminated ceilings is often unique and unrepeatable. Thanks to a wide range of advantages of such equipment as ice ceiling lighting, the designer is given freedom of action, so the ceiling with the help of such lighting devices can be equipped not only in an original way, but also harmoniously.

Due to the fact that plasterboard suspended ceilings have gained similar popularity today, we should dwell in more detail on how ceiling lighting should be mounted, and what types of such lighting are on sale today.

Installation of ceiling lighting around the perimeter of the room

Work on the installation of this lighting equipment must begin with the installation of a special one around the perimeter of the room. It is in this plinth that the light sources will be installed. It is worth noting that the direction of the flow of rays can be adjusted, that is, they can shine both on the walls and on the ceiling. In the event that the ceiling is equipped with a glossy surface, then the illumination of the ceiling around the perimeter can provide an unusual reflection effect. Such a ceiling with illumination around the perimeter looks quite impressive.

Among the whole variety of elements of such equipment as ice ceiling lighting, it is customary to single out neon lamps and duralight, which are able to create coziness in the room and give a feeling of lightness.

As already mentioned, the ceiling plinth, mounted around the perimeter of the room, can be equipped with fluorescent lamps, duralight, neon lighting. As for duralight, such ceiling lighting around the perimeter is distinguished by a relatively low cost, long service life, ease of installation and a wide range of shades used for lighting. Moreover, duralight does not heat the baseboard, which avoids the risk of a fire hazard.

Ceiling lighting options

Today it is customary to move away from the traditional and rather boring lamps for side lighting, most often represented by sconces. Increasingly, for lighting devices of this kind, innovative versions of devices that create diffused lighting are used (more: ""). Thanks to the work of experienced professionals, it is possible to design built-in side lighting in such a way that the entire surface of the wall glows, and not just one part of it.

Categories of ceiling lights

In order to know exactly which lighting device is best to install in a particular room, it is recommended to study the following ceiling lighting options:

Technical Features of LED Ceiling Tape

This type of ceiling lighting can be easily mounted on any, even the most uneven surface of a plasterboard sheet. In addition, the material is able to produce an even and aesthetically beautiful color, it is not energy-consuming, it is able to change color shades. lasts a long time, it is bright and provides a wide angle of illumination, so today this backlight can be called optimal. To install an LED strip, you first need to calculate the perimeter of the ceiling, as well as select the type of the strip itself. To highlight only one circuit with light, it will be enough to use 30 diodes per 1 m², but to provide bright illumination, at least 60 to 120 diodes per 1 m² will be required. after completing the calculations, it is necessary to proceed with the selection of the power supply.

If there is a need to assemble an LED strip from several separate elements, you should remember that you can cut the material only for every 3 LEDs (the places of possible cuts are usually displayed on the tape). When soldering parts, do not forget about the polarity of the tape parts, since the one-color material is connected according to the plus and minus principle, and for the colored tape, the contacts are of the same name. Wires must be connected to the power supply. When installing the tape, it is recommended to provide a small margin to avoid the risk of a short circuit, and the lack of length can be compensated for with two-wire wires. In this case, the attachment points must be carefully insulated in a heat shrink tube. The optimal voltage for the operation of the tape is 12 volts.

To maximize the life of the LED strip, it is recommended to mount samples with a length of at least 15 meters. A backlight of this length will last longer than a short ribbon.

Stretch ceiling lighting device, more on the video:

Installation of ceiling lighting with polystyrene cornice

When installing even such an element as a slatted ceiling with lighting, you can use a polystyrene cornice, which can be easily bought at any hardware store. When installing this element around the perimeter of the room, be sure to use self-tapping screws, since due to the large weight of the cornice itself and the tapes installed on it, the entire structure can turn out. It is important not only to screw the screws tightly, but also to putty their hats. If possible, it would be better to purchase a cornice that matches the color of the ceiling. The power supply must also be fixed in the same place, and the wire must go down to the outlet.

Thus, we can say that the installation of ceiling lighting around the entire perimeter of the room is not too troublesome, but if all stages of work are observed and if the installation instructions are strictly followed, the lighting fixtures will last a long time and reliably.