Fire Alarm Repair
Any equipment has the ability to fail. This is due to mechanical damage, wear, failure of individual electronic elements. It helps to extend the work, but many managers refuse it. They mistakenly believe that repairing a fire alarm will cost them less.
Types of security and fire alarm repairs
You are not talking to an abstract "company representative", manager or secretary. I take responsibility and personally answer to you for the result. The cost of my work is 15-30% lower
When a fire safety system fails, property and people's lives begin to be at increased risk. Therefore, it is necessary to return it to working condition as soon as possible. To reduce downtime, repairing fire alarm systems can be:
- Urgent or emergency.
- Current or planned.
- Capital.
Most expensive is urgent repair. It is produced in case of an unexpected failure of individual elements of the system. Its complexity lies in the inability to predict damage. During the wizard, a malfunction is detected and eliminated.
Scheduled repair performed on time. Its main goal is to identify unreliable elements and nodes that are very likely to fail soon. To extend the work of the fire safety system, their replacement or repair helps.
With capital work full system testing is in progress. After it, all system parameters are restored to factory values, and the uptime specified in the manufacturer’s documentation is ensured.
Repair of fire-fighting systems is an important component in ensuring the safety of operation and the effectiveness of sensors, warning systems and automatic extinguishing. Timely preventive maintenance allows to guarantee the correct operation of all elements in extreme situations.
When changing the requirements for protection against fires or increasing the area of \u200b\u200bthe protected premises, it is worth thinking about upgrading the system. We send an engineer to your facility, where he analyzes the situation, draw up a plan for updating or repairing components with minimal cost.
Key Features
We have a full range of diagnostic and upgrade systems available. We reinstall the sensors, correct the mistakes of others, replace combustible cables with non-combustible ones according to fire safety standards.
There are several typical cases in which preventive and repair work is necessary.
- Failure of individual elements of the system.
- Deterioration is recorded, equipment service life is exceeded.
- During the inspection, violations were revealed: non-compliance with the standards for buildings of a certain size and type, non-compliance with existing risks.
Ignoring the rules provided for by the law entails significant fines, so it is really very important to work out the quality of the assembly and response of the system.
Repair and modernization services
We work at any facilities: in kindergartens, schools, universities, workshops, factories and workshops, in administrative and municipal buildings. We will help you think through the storage system of fire extinguishers and personal protective equipment in a confined space.
Order a preventive maintenance repair of building fire protection systems from us, and you will receive professional consulting support and an individual selection of all the necessary components. Since we ourselves design fire protection systems, it is very easy for us to navigate even in other people's schemes, take up non-standard projects and ensure compliance with current regulations for inspection authorities.
- We repair fire water pipes.
- We restore the wiring.
- We install and transfer pumping stations.
- We adjust the sensitivity of the sensors and replace them if necessary.
- Testing the complete systems assembly.
We use professional measuring equipment and proven consumables in our work. Contact us, and we will provide all the necessary information, talking about the possibilities of modernization in your particular case.
The company SpetsPozhSistema carries out maintenance, replacement or modernization of fire protection systems. Our engineer makes an on-site visit to evaluate fire protection systems.
Repair, replacement or modernization of building fire protection systems makes sense if:
1. The fire control system has failed
2. The system requires replacement for equipment wear
3. The system has exceeded the life of the equipment
4. Technical characteristics of the equipment do not correspond to the type of building
5. Specifications are not suitable for fire safety standards and regulations.
Most often, modernization of the system requires facilities where the equipment has not changed for a long period of time, such as factories, schools, warehouses, etc., where the laying of cable routes was carried out with an ordinary cable, and not with fuel, which is a big violation of fire safety standards.
There are business centers, office buildings where the line of fire alarm equipment is obsolete and maintenance equipment is simply not found; in such cases, it is necessary to replace alarm control panels and fire alarm sensors.
Our company carries out the replacement, modernization or maintenance of fire-fighting systems of the building, the transfer of pumping stations and fire water supply systems.
Modern security systems, made on promising microelectronic components, are quite reliable, but during the long-term operation it is possible to repair the security and fire alarms. Most often out of order not the main unit comes out, and various sensors included in the security system. It should be borne in mind that the reasons for the output of sensors in security and fire systems can be different.
Possible fire alarm malfunctions
The fire alarm is a basic device to which various sensors (detectors) are connected using two-wire lines. The main cause of malfunctions may be violations of operating conditions, defects in electronic components or untimely preventive maintenance.
In alarm systems, all faults can be divided into several groups:
- System errors of the control panel (PKP)
- Loop violations
- Violations in the work of fire detectors
- Malfunctions of warning and signaling devices
Built-in hardware diagnostics of the main unit allow maintenance personnel, according to the fault code, to identify the defect and take measures to eliminate it. Alarm repair and regular preventive maintenance are carried out by employees of the company, which carried out installation and configuration of the system. Preventive inspection and verification of the operation of detectors is carried out once a month.
The next defect in the fire alarm can be considered a loop violation. Most often this is a wire break, but there is also a short circuit.
In the event of a break or short circuit, the loop status indicator blinks intermittently and the “Fault” indicator lights up, and the sound warning devices do not turn on.
The most common fire alarm system malfunctions are violations fire detectors.
The following types of sensors are used in these systems:
- Smoke detectors
- Manual call points
- Thermal sensors
The design of smoke detectors is such that the element that detects the appearance of smoke, despite the protective mesh, is easily clogged with dust, which triggers an alarm and triggers a fire alarm.
It is quite easy to identify a defective sensor by the intermittent operation of the red LED on the case.
Manual call points (IPR) are red plastic modules. They are mounted on the walls at an affordable height. They have a button or lever for manually triggering an alarm. These sensors serve as an object of constant attention in schools and other childcare facilities. They are not only pressed, but also broken, despite strict warnings. Self-healing modern thermal sensors fail extremely rarely, and a defect can only be associated with factory defects. In addition to defects in the device and sensors, malfunctions or violations of the integrity of wires are found in warning systems. Therefore, sirens, lights, displays, and voice warning systems should be regularly checked for performance.
Alarm Faults
Signaling devices are designed in such a way that the same device can be used as a fireman and as a security one. To do this, it is enough to program the cables in different ways. Of course, large objects have separate fire and security alarm systems. The device itself signals any defects, after which the responsible person calls the representative of the relevant service, who carries out the repair of the fire alarm systems.
Compared to fire alarms, security systems use more different types of sensors.
These include:
- Magnetic sensors
- Motion sensors of several types
- Acoustic units responsive to glass breaking
- Vibration sensors
The sensors of the first type are installed on doors and windows and are triggered when they are opened. Defects of these sensors are easily detected when the alarm is armed. If the window or door is not closed somewhere, this cable will not be installed in the desired mode. Magnetocontact sensors consist of a magnet and a reed switch, so their malfunctions are associated only with mechanical damage. Other types of sensors include an electronics board, which can fail for various reasons.
In addition to routine maintenance and troubleshooting of sensors and the base unit, in some cases, overhaul of the alarm system can be carried out. During operation, especially in rooms with difficult conditions, the insulation of the wire lines is gradually destroyed, which leads to short circuit loops. Therefore, during overhaul, first of all, the wiring is completely replaced. The device itself, as well as sensors become obsolete from a technical point of view, and replacing equipment with a new one is fully justified, since modern equipment is more reliable and economical.
Many users are interested in issues related to the reliability of fire alarm systems. Modern systems are quite reliable and designed for a long and continuous life. Mechanical damage to an alarm will immediately trigger an alarm. Regular prevention of fire and security alarms ensures that the system does not fail at the right time.
Wireless security systems are less reliable, since the radio signal from the sensor can be muffled or transcoded by special means.
The cost of ongoing maintenance of the OPS
The cost of a monthly service depends on many factors. This is the area of \u200b\u200bthe room, the number of loops and sensors and the "age" of the fire alarm. There are also increasing coefficients, depending on the height of the sensors.
The approximate cost of monthly maintenance, depending on the area, is as follows:
- Up to 100 square meters m - 2500 rubles
- From 101 to 250 sq. m - 25 rubles per square meter
- From 1001 to 2000 sq. m - 10 rubles per square meter
Other companies do not take into account the footage, and the cost is calculated based on the number of sensors. There are many companies operating in the market for installation and maintenance of fire alarm systems, so you can always choose the best option.
Repair of fire systems is carried out in order to restore the operational state of the fire system in the process of its operation. Repair of fire systems is carried out according to the plan for preventive purposes in order to avoid failure of the system in case of fire or already in case of failure of the fire safety system.
Repair procedures for fire safety systems are made taking into account the recommendations of the equipment manufacturer's factory, the requirements of regulatory documents and fire safety standards.
Repair of fire systems is carried out by experienced specialists in the operation and installation of a security fire system. Typically, repair of fire systems is carried out by two specialists. Working in pairs is most convenient, since during the repair process it is necessary to ring the tracks in order to simultaneously determine the malfunction of the system.
Where can I order repair of fire systems
Company "Montazh-OPS Service" provides its services for the quality repair of fire systems. Qualified specialists of our company will quickly and efficiently repair fire systems.
What types of work includes the repair of fire systems provided by us:- Checking and testing the performance of the control - receiving panel, control panel;
- Checking the performance of smoke, heat and fire sensors for operation;
- The next step is the continuity of cable routes and loops;
- Further, breaks in the cable route and loops of the fire system are eliminated;
- Smoke and manual fire detectors are partially replaced;
- If the control - receiving system is malfunctioning during testing, it is replaced;
- Also, the stage of repair of fire fighting systems is the purging and cleaning of serviceable detectors.
- Cable cable breakage due to repair of the fire system by other persons;
- Faulty contacts of fire detectors;
- Oxidation on the connectors - this happens if the room is wet;
- Termination of fire detectors due to expiration of equipment.
Company Masters "Montazh-OPS Service" with ease, quickly and efficiently repair your fire system. We provide our customers with a high level of service, because we care about your safety!
A fire alarm is a guarantee of protection for your business or home from accidents. Fire safety system can be installed in any premises and at any objects. Specialists of the Security for company have extensive experience in installing and connecting such security systems at various facilities. If the fire alarm installation is carried out in accordance with all the rules, then the fire safety system will work without complaints and failures. It doesn’t matter if you need a fire alarm in the office, apartment, warehouse, in the house - only professionals can install a fire safety system. Then it will not only provide adequate protection, but will also pass a fire control inspection. Professional installers of our company will install a fire alarm system in accordance with all the requirements of GOST, as well as fire safety stands at your facility. Fire alarm repair and fire safety audit - we also provide these services to our customers.
| The area of \u200b\u200bthe protected object | OPS Maintenance Price |
| The cost of work | |
|---|---|
| up to 100 sq.m. | 1200 rub |
| 100-500 sq.m | from 1200 to 9000 rub. |
| from 500-1000 sq.m. | from 9000 to 15000 rub. |
| 1000 -2000sq.m | from 15,000 to 25,000 rubles. |
| from 2000 sq.m. | negotiable from 26 thousand rubles. |
| + Collapse price list | |
Installation of fire safety systems:
In order to calculate the installation price of a fire system, it is necessary to calculate the cost of equipment for a particular object. For these purposes, the company's specialists travel to the facility free of charge and make a preliminary assessment. After that, the necessary equipment and fire alarm sensors \u003d are selected for your facility.
All the services provided by the Security for company, including those affecting the design of fire alarm systems, are accompanied by competent technical support. If necessary, you can seek advice and help. Customer support is free.
The effectiveness of the fire alarm directly depends not only on the design, but also on the subsequent installation. Employees of Security for "design and the subsequent installation of security systems, ensuring stable and uninterrupted operation of any security system.
OUR LICENSES
